- 1 How do you update the control hub robot controller?
- 2 How do I reset my expansion hub?
- 3 How many sensors does the Rev expansion hub have?
- 4 How do I connect my control hub?
- 5 How do I connect to my FTC control hub?
- 6 What is a rev expansion hub?
- 7 How do I reset my control hub password?
- 8 How do I update my FTC driver station?
How do you update the control hub robot controller?
Select the Control Hub. After selecting the Connected Hardware the Update tab will pop up. Under Robot Controller App select Download. Once the app has downloaded, select Update.
How do I reset my expansion hub?
Press and hold the button on the front of the Control Hub. While pressing the button, power on the Control Hub. Release button when the Control Hub LED begins to flash a multitude of colors. When the Control Hub flashes Blue then Green it has completed the reset and is ready to connect.
How many sensors does the Rev expansion hub have?
The IMU incorporates three sensors: a 3-axis accelerometer, a 3-axis gyroscope, and a 3-axis geomagnetic sensor. This sensor can be used to determine orientation and location of the robot.
How do I connect my control hub?
On the Driver Station page, open the menu from the top right corner, then select Settings. Select, Pairing Method. Select, Control Hub. Select, Pair with Robot Controller.
How do I connect to my FTC control hub?
Power on the Control Hub, by plugging the 12V Slim Battery (REV-31-1302) into the XT30 connector labeled “BATTERY” on the Control Hub. The Control Hub is ready to connect with a PC when the LED turns green. Note: the light blinks blue every ~5 seconds to indicate that the Control Hub is healthy.
What is a rev expansion hub?
The REV Robotics Expansion Hub is a low-cost education device that can communicate with any computer (Commonly an Android Phone or the REV Robotics Control Hub ) to provide the interfaces required for building robots and other mechatronics.
How do I reset my control hub password?
If you have problems signing in to the customer view in Control Hub, you can change your administrator password. From the customer view in https://admin.webex.com, enter your email address, and click Sign In. Click Can’t access your account?, enter the text from the image, and click Submit.
How do I update my FTC driver station?
In the search window of the Google Play Store type in the words “FTC Robot Controller” or “FTC Driver Station” or the words “FIRST Tech Challenge” to find the appropriate FTC app for your Android device. continue with the update process.